• 联系人:崔经理
  • 手机:15964552228 18765411128
  • 地址:济南市天桥区南徐物流园
  • 网址:www.jnml518.com
新闻中心当前位置:首页-新闻中心
    磁性自吸软门帘验收及标准要求介绍
    来源:www.jnml518.com  2018-9-20 17:23:08
    毛坯件的磁性自吸软门帘验收与技术要求的核实性。阳极氧化时极有可能被击穿,从而使其周围铝的表面被绝缘胶站污面影响该处氧化膜的形成。
    Acceptance and technical verification of magnetic self suction soft curtain for rough parts. When anodizing, it is very likely to be broken down, so that the aluminum surface around it is affected by the insulating adhesive station fouling.
    签于此,磁性自吸软门帘这类件应,经机械方法拆散后分别进行各自的防护处理,然后再装配组合否则不但在整个表面处理过程中要花费大量精力,还有可能因此而造成报废,请机械加工者予以配合,这样做对质量是有保证的。
    Signed here, magnetic self-priming soft door curtain such parts should be separately protected by mechanical methods after being dismantled, and then assembled or assembled, or not only in the whole surface treatment process to spend a lot of energy, but also may cause scrap, please mechanical processors to cooperate, so that the quality is guaranteed.
    由两种牌号磁性自吸软门帘铝材组合的毛坯件有什么缺点? 如何处理?

    What are the disadvantages of the rough parts made of two kinds of magnetic self sucking soft curtain aluminum materials? How to deal with them?

    济南软门帘

    对一般阳极氧化工艺来说,不同牌号组成的制件仍可正常进行妇极氧化处理,但所获膜层的外观会随各牌号的不同而有所区别,发属于装饰件则事先要向有关人员说明,必要时预先改正。对于以防护为主的则就可以不用考虑这些因素了,磁性自吸软门帘这种工件阳极氧化后会出现从色成三他( 三色包括焊条材料)化膜,为此,应在设计中提出要水,即用同一牌号材料与焊料,械加工时不用杂牌铝,这样就可避免上述现象的发生。
    For general anodic oxidation process, the parts with different brands can still be treated normally by anodic oxidation, but the appearance of the film will be different with the different brands, and the decorative parts should be explained to the relevant personnel beforehand and corrected if necessary. For the protection of the main can not take into account these factors, magnetic self-priming soft door curtain after anodic oxidation of the workpiece will appear from color into three other (including electrode material) film, for this reason, should be proposed in the design to water, that is, with the same grade of materials and solder, machining without miscellaneous aluminum, so as to avoid The above phenomenon occurs.
    这需要电镀工艺师在工艺会鉴时就应认真进行核实,如有上述题应及时予以纠正。
    This requires that the electroplating technicians should carefully verify in the process certification, if there are the above problems should be corrected in a timely manner.
    遇磁性自吸软门帘有漏气的空腹件怎么办?
    What should I do if I have an empty fasting with a magnetic self suction curtain and a soft curtain?
    毛坏件在水中设池试验时,如发现你接处有气池冒出,则应证重新娜技,直至水中不再冒有气池方可进行转化服或阳极复化处,否则氧化处理的过程中所有路液都会进到污染,生成的银化膜阳大排工品会造成报废。
    If a pool is set up to test the worn parts in the water, if there is an air pool coming out at your junction, it is necessary to prove the technique again. Only when there is no air pool in the water, can the conversion clothing or anodic revamping be carried out. Otherwise, all the road fluids in the oxidation process will be polluted and the silver film anodic plating products will be scrapped.
    以上济南软门帘就是给大家分享的内容了,想要了解更多的精彩内容请点击http://www.jnml518.com进入我们的官方网站,或者是搜索我们的关键词查找,我们会有更多的精彩内容与您分享!
    The above Jinan soft curtain is for everyone to share the content, want to know more exciting content please click http://www.jnml518.com to enter our official website, or search our keyword search, we will have more exciting content to share with you!